Applying IEEE Std 1547-2018: What Public Utilities Commissions Need To Decide and Do
This provides highlights of the Electric Power Research Institute (EPRI) presentation, Applying Institute of Electrical and Electronics Engineers Standard 1547-2018 (IEEE Std 1547-2018): What Public Utilities Commissions Need To Decide and Do.
Applying IEEE Std 1547-2018: What Public Utilities Commissions Need To Decide and
Do (Boemer 2018)
The presentation was given by Dr. Jens C. Boemer, principal technical leader at EPRI, at a joint meeting sponsored by the Committee on Regional Electric Power Cooperation and the Western Interconnection Regional Advisory Board on April 21, 2018.
- State regulators
- Policy makers
- Energy offices
This presentation offers a high-level overview of the revised IEEE Std 1547 interconnection standard, with discussion of key considerations and potential implications of integrating new capabilities into practice. There are 21 content slides in this presentation.
|Overall scope and intent of the standard||Slide 23: Shows how standards fit into the broader context of grid integration|
|Reactive power capabilities, voltage and reactive/active power control||Slides 14-15: Highlights concept of ranges of allowable settings, and gives example of increased hosting capacity using voltage reactive-power control settings|
|Abnormal voltage and frequency response (ride-through)||Slides 10-13: Introduces performance categories for normal and abnormal conditions, and considerations for deciding on which category to implement|
|Application of the standard/integrating into practice||Slides 2-6: Describes four steps to consider when implementing the standard, with examples of benefits at transmission and distribution level|