Skip navigation to main content.
NREL - National Renewable Energy Laboratory
About NRELEnergy AnalysisScience and TechnologyTechnology TransferTechnology DeploymentEnergy Systems Integration

Electron Probe Microanalysis

Electron Probe Microanalysis is an elemental analysis technique which uses a focused beam of high energy electrons to non-destructively ionize a solid specimen surface for inducing emission of characteristic x-rays.

Electron probe microanalysis is used to map the chemical composition of the top surface layer of solid-state materials.

As with scanninge electron microscopy, electron probe microanalysis (EPMA) probes the surface of a sample with high-energy electrons, thereby stimulating inner shell ionization in the atoms. This results in the emission of characteristic X-rays that serve as signatures of the elements present. Either energy-dispersive spectroscopy (EDS) or wavelength-dispersive spectroscopy (WDS) are used to detect and identify the emitted X-rays.

Applications

Compositional Analysis

The primary application of EPMA is compositional analysis of a sample, either for the sample as a whole or with respect to a local feature on the micron scale. With a sensitivity of ±0.2 at.%, it is the most convenient, accurate, and rapid method for compositional analysis, especially for microanalysis.

Compositional Mapping

Employing either EDS or WDS, EPMA is used to produce elemental line scans or area scans that can be superimposed on topographic maps, thereby correlating topographical features with their chemical composition.

Special Features of EPMA

  • EDS — For simultaneous display of most of the chemical spectrum (from boron to uranium) and for quick surveys of the area of interest before performing a more accurate quantitative analysis with WDS.
  • WDS — Four spectrometers with ten diffracting crystals. The use of a single-channel analyzer allows much better peak resolution and helps to resolve peak overlap problems common in PV materials.
  • Extensively Computerized — Computer system controls the electron beam, spectrometers, specimen stage, and data processing.

For additional information, contact Mowafak Al-Jassim, 303-384-6602.