HSU Current Data

CURRENT IRRADIANCE and METEOROLOGICAL CONDITIONS

November 21, 2009
17:37 PST
Entire Day Daytime

IRRADIANCE

Global Horizontal	-1.23	W/m²
Direct Normal (calc)	0.00	W/m²
Diffuse Horiz (band corr.)	-0.05	W/m²
Diffuse Horiz (shadowband)	-0.05	W/m²

METEOROLOGICAL

Zenith Angle	98.44	^o
Azimuth Angle	250.63	^o
Airmass	-1.00
CR510 Temperature	10.49	^oC
CR510 Battery	13.31	VDC

Output Type: Selected Data (ASCII Text)
Selected Data (ZIP Compressed)
Selected Hourly Data (ASCII Text)
Selected Hourly Data (ZIP Compressed)
Selected Daily Statistics (ASCII Text)
Full Raw Data (ASCII Text)
Full Raw Data (ZIP Compressed)
"Live" Raw Data (ASCII Text)
Selected Display (HTML)
Selected Plot

Black & White Plot
English Conversion (Meteorological)

GENERATE CUSTOM DATA

	User-defined calculation using an instrument and another instrument or value:

	Calculate the third irradiance component using global, direct, or diffuse:

No custom data

Select y-axis primary secondary

Data is automatically updated every 60 minutes.
(DISABLE automatic browser refresh.)

Notice: Data have not been reviewed for accuracy or completeness, please read the disclaimer.
Further instrument information, including current serial numbers and calibration factors, are available by clicking the instrument name. Some of these serial numbers can also be clicked for further instrument history and uncertainties.
Irradiance data will always appear on primary axis and meteorological data will always appear on secondary axis.
Selected data or full raw data has the option of being compressed using the ZIP format. An extraction utility can be obtained from PKWare or WinZip
Selected hourly data will generate hourly data by averaging the input data for the entire day(s), custom data will be ignored. Note: DO NOT use this feature with wind direction measurements, the resulting averages will be bogus.
Selected daily statistics will generate daily totals (for irradiance data) and daily averages (for meteorological data) using the input data for the entire day(s), custom data will be ignored. The daily maximum and minimum (if applicable) will also be generated. Note: Negative values from shortwave irradiance instruments will be set to zero when accumulating daily totals. DO NOT use this feature with wind direction measurements, the resulting averages will be bogus.
Selected display will generate a customized data display, similar to the above table, custom data will be ignored.
English conversion only applies to selected data or plot and has no effect on irradiance or custom data.
When selecting raw data or wind rose, all selections (except the date) will be ignored.
The raw data options are the complete raw data record(s) from the datalogger, these are the raw data field IDs.
"Live" raw data is a single record from the most recent data collection and full raw data is all the data from midnight to the latest record.
The calculate third component option uses the formula: Global = Direct * Cosine(Zenith) + Diffuse to calculate a third component based on the selected two. This option should only be used for pyrheliometers and horizontal pyranometers.

[NREL] [MIDC] [HSU SoRMS]